Siborg’s LCR-Reader shielded two-wire Kelvin Probe Connector allows to use LCR-Reader as a probe station. It also allows users to measure components that are beyond the tweezers allowable spread. The Connector is fully compatible with other tweezer-like meters in particular all models of Smart Tweezers.
The kit comes with 5 different kinds of probes; 2 alligator clips, 1 longer pin-probe, 1 medium pin-probe, 2 multimeter 4 mm jack plugs, 1 spade connector. Each tip screws into the end of the connector cable.
LCR-Reader Probe Connector is simple to install: simply unscrew one of the gold-plated probes from LCR-Reader; place the flat side of the connector cable on the LCR-Reader’s probe arms with the gold flex cable and the connector cable’s flat end with two gold stripes. Return screws to the holes and start measuring.
Extra-Fine Pin Probe
Fine Pin-Probe
The LCR-Reader Store is now offering Fine Pin Probe (124 mm) and Extra-Fine Pin Probe (73 mm) attachments for the LCR-Reader and Smart Tweezers devices. These probes can be used with the LCR-Reader Probe Connector or 4 mm multimeter jacks. The probes offer long, sharp pin probes for more precision while using the LCR-Reader or Smart Tweezers as full probe stations.
Note: the Fine and Extra-Fine Pin Probes are sold separately. LCR-Reader Probe Connector or wire not included.